Select Language
English
中文版
Italia
русский
tiếng Việt
ภาษาไทย
Melayu
हिंदी
Pilipino
العربية
Français
español
Browse Categories
Tank truck(74)
Water truck(95)
Pressure vessel(LPG truck)(37)
Fire truck(31)
Dump Truck(25)
Garbage truck(105)
Bulk cement truck(23)
Concrete mixer truck(31)
Tow truck(50)
Van truck(137)
Contact us
Tel: 0086-0722-3229933
Fox: 0086-0722-3229933
Email: cj001@urspv.com
Add: Starlight industrial park, Northern suburbs, Suizhou city, hubei province, C...
Contact Now
Home > News > Industry News > Wrong car maintenance

News

Wrong car maintenance

  • Author:CJE
  • Release on :2017-03-13

In the maintenance of the wheels, a small number of drivers in order to prevent the wheel bolts and nuts are rusted, the installation bolts and nuts are coated with lubricant designed to be, but it is not only wrong, tanker traffic safety and bring a certain degree of risk. Tighten bolts and nuts after each other with self-locking features. And coated with lubricant, the coefficient of self-locking between the two smaller, self-locking performance. In the car at high speeds, bolts and nuts are easy to loose or even fall off, causing traffic accidents.


Do not rinse body

Summer has arrived, a common flush on the driver side body, wipe with a rag, to remind the driver at this point is: best not to water wash directly within the body. Because beneath the cab floor pad is not "flat" structure needs to make the cab floor pad below the Groove, through-hole so much. Rinse, or deposited in the Groove is not easy to dry, either flow from the through-hole on the gearbox and other component corrosion. Especially the sealing performance of oil tankers cannot directly flush with water inside the body. The correct method is to use a damp cloth to wipe, but to avoid stagnant water.


Do not mix different brands of cooling fluid

Lack of car engine coolant should be added in a timely manner, but do you use different brands of coolant temperature in it? if so, advise you to get out of coolant, add coolant of the same brand again. Because different brands of cooling liquid whose chemical properties may vary, such as ferrous metals and effective preservative, but often have a corrosive effect on tanker aluminum products and applies to tanker preservatives are harmful to alloy of aluminum alloy. Due to the different brands of car coolant preservative used by different, so you cannot mix.