Select Language
English
中文版
Italia
русский
tiếng Việt
ภาษาไทย
Melayu
हिंदी
Pilipino
العربية
Français
español
Browse Categories
Tank truck(74)
Water truck(95)
Pressure vessel(LPG truck)(37)
Fire truck(31)
Dump Truck(25)
Garbage truck(105)
Bulk cement truck(23)
Concrete mixer truck(31)
Tow truck(50)
Van truck(137)
Contact us
Tel: 0086-0722-3229933
Fox: 0086-0722-3229933
Email: cj001@urspv.com
Add: Starlight industrial park, Northern suburbs, Suizhou city, hubei province, C...
Contact Now
Home > News > Industry News > The Use Methods of The Auxilia.....

News

The Use Methods of The Auxiliary Wheel of One-Towed-Two Wrecker Truck

  • Author:Chang Jie
  • Release on :2016-11-23

1. Product introduction of type-B auxiliary wheel of one-towed-two wrecker truck

B-type auxiliary wheel is one of the two-wheel wrecker, which is characterized by lightweight, easy to use (no jack), fast, low lift stroke, especially for small vehicles with
very low chassis. It is mainly used for better road conditions in the city, dragging the distance not far from the barrier to use. In the care of the accident vehicle wheels, replace the accident or a variety of reasons caused by mechanical damage can not travel the role of the tire. 1. Product introduction of type-B auxiliary wheel of one-towing-two plate wrecker truck
B-type auxiliary wheel is one of the two-wheel wrecker, which is characterized by lightweight, easy to use (no jack), fast, low lift stroke, especially for small vehicles with
very low chassis. It is mainly used for better road conditions in the city, dragging the distance not far from the barrier to use. In the care of the accident vehicle wheels, replace the accident or a variety of reasons caused by mechanical damage can not travel the role of the tire.

2. Use Methods of type-B auxiliary wheel of one-towing-two plate wrecker truck
First determine which tires need to hold up.

As shown in Figure A, place the auxiliary wheel under the wheel and pull the two front and rear detent latches up and rotate them to a small angle to prevent spring return.

Figure B: the use of force lever set into the lever handle, forced arrow direction to pull to Figure C state.

In the state of Figure C, the corresponding positioning pin lock rotation in the direction of the arrow to reset the locking axle frame, to prevent the axle frame back.

Figure D: in accordance with the third step, put the lever into another lever lever in accordance with the direction of the arrow to pull to the E state.

In Figure E state, in accordance with the fourth step will be the corresponding positioning pin lock rotation in the direction of the arrow to reset the locking axle frame, to prevent the axle frame back.

After completion of the above work, the other wheel of the accident vehicle is lifted by the other operation wheel according to the above operation sequence.

After the completion of the whole lifting process to carry out other aspects of traction to prepare the matter, only all of the preparatory work according to wrecker to use the rules to do a good job, can the failure vehicle be dragged to drive.

3. Use conditions of type-B auxiliary wheel of one-towing-two plate wrecker truck

Towed vehicle type: mini tool vehicles, all types of cars and vehicles of the same type
Wheel diameter (mm): 500 to 750
Auxiliary wheel maximum carrying capacity (t): high grade flat road ≯ 0.8; medium level flat road ≯ 0.6; poor road - can not be used
Vehicle speed limit (km / h): ≯ 30
Turn the curve when> 90 ゜ hour (km / h): ≯ 15
A continuous mileage (km): ≯ 10

4. The maintenance and maintenance of type-B auxiliary wheel of one-towed-two plate wrecker truck

As the type-B auxiliary wheels of Changjie wrecker truck are very small, it wears up quickly and is a normal phenomenon. It is often used correctly and timely maintained. B-type
auxiliary wheel rubber rim and the wheel bearing is the most vulnerable to damage the part, the bearings can be repaired and replaced after a bad, and rubber wheels and wheels due to traffic or speed too fast to produce high-temperature stripping only after the replacement of the new wheels , To ensure the normal use of the work.