Select Language
English
中文版
Italia
русский
tiếng Việt
ภาษาไทย
Melayu
हिंदी
Pilipino
العربية
Français
español
Browse Categories
Tank truck(74)
Water truck(95)
Pressure vessel(LPG truck)(37)
Fire truck(31)
Dump Truck(25)
Garbage truck(105)
Bulk cement truck(23)
Concrete mixer truck(31)
Tow truck(50)
Van truck(137)
Contact us
Tel: 0086-0722-3229933
Fox: 0086-0722-3229933
Email: cj001@urspv.com
Add: Starlight industrial park, Northern suburbs, Suizhou city, hubei province, C...
Contact Now
Home > News > Industry News > Refrigerated trucks before dri.....

News

Refrigerated trucks before driving to be done a little checking

  • Author:Changjie
  • Release on :2016-06-14

China Van refrigerated truck manufacturer
Chang jie Van refrigerated truck
  Refrigerated trucks as a special transport vehicles, must be checked before driving points to note, in case the traffic on the way to generate some unnecessary trouble, each loaded with cargo before recommend the following checks:
  1. refrigerated truck diesel or gasoline fuel supply must be sufficient to ensure that the engine is running at least until the next check point.
  2. refrigerated truck engine oil supply, not to excess fuel (replacement once a year).
  3. refrigerated trucks Coolant Check the coolant level gauge to see whether the correct amount of coolant, the pointer should be in the range of white. If the coolant level in the tank in the red range, equipped with a cooling liquid need to add coolant. Typically the coolant is a mixture of glycol and water (according to the actual product is used in different proportions), and shall provide protection to -34 ℃ without freezing. Note: When the coolant hot, do not open the lid containing coolant child.
  4. refrigerated truck battery terminals must be solid, no corrosion. Electrolyte should be full mark.
  5. belt and the belt must be well adjusted to an appropriate degree of swelling. In the span between pulleys central 13mm sag.
  6. Check the electrical wiring in the electrical control all electrical connectors, make sure they are fixed firmly. Wires and terminals should be free from corrosion, cracking or burning water.
  7. Visually check the structure of the unit for leaks, loose parts or breakage and other damage.
  8. Install shim spacer unit should be pressed firmly in good condition.
  9. refrigerated trucks coil condenser and evaporator coils should be clean and free of dirt.
  10. Check defrost drain defrost drain hose and fittings to ensure they are clear.
  11. Compartment loading the goods can not block the evaporator outlet and return air, to keep the cool air inside the cargo compartment circulation, to ensure that no hot spots inside the car.