Select Language
tiếng Việt
Browse Categories
Tank truck(74)
Water truck(95)
Pressure vessel(LPG truck)(37)
Fire truck(31)
Dump Truck(25)
Garbage truck(105)
Bulk cement truck(23)
Concrete mixer truck(31)
Tow truck(50)
Van truck(137)
Contact us
Tel: 0086-0722-3229933
Fox: 0086-0722-3229933
Add: Starlight industrial park, Northern suburbs, Suizhou city, hubei province, C...
Contact Now
Home > News > Industry News > Garbage truck maintenance thre.....


Garbage truck maintenance three do not

  • Author:Chang Jie
  • Release on :2017-04-29

Garbage truck drivers on the daily maintenance of garbage trucks are very important, and now a lot of drivers friends like to do their own hands to do some simple vehicle maintenance, but the following three things can not do.

1. A small number of owners in order to prevent the wheels on the bolts and nuts rust, the installation of ingenuity to the bolts and nuts are coated with lubricants, not knowing that this approach is not only wrong, but also to traffic safety to bring some hidden dangers. Bolts and nuts are tightened and have a self-locking property. And coated with lubricants, the self-locking coefficient between the two smaller, self-locking performance decline. In the garbage truck at high speed, the bolts and nuts are easy to loose or even fall off, causing traffic accidents.

2. Garbage truck owners often rinse the body with water inside, while wiping with a rag, this is not correct. Inside the body is best not to use water directly flush, because the cab floor pad is not the following "one horse Pingchuan", the structure of the need to make the floor under the floor of the pad, the hole is very much. After rinsing with water, either deposited in the groove is not easy to dry, or from the hole to the transmission and other components to produce corrosion. The correct way is to wipe with a wet cloth, but to avoid water.

3. I believe that all the owners are aware of the lack of engine coolant in the case should be added in time, but some owners put different brands of coolant together, in fact, this is wrong. Because different brands of coolant its chemical properties may vary widely, such as ferrous metal effective preservatives, but often have corrosion of aluminum products, and for aluminum preservatives are harmful to ferroalloy. Because different brands of coolant used in different preservatives, it can not be mixed use.