Select Language
English
中文版
Italia
русский
tiếng Việt
ภาษาไทย
Melayu
हिंदी
Pilipino
العربية
Français
español
Browse Categories
Tank truck(74)
Water truck(95)
Pressure vessel(LPG truck)(37)
Fire truck(31)
Dump Truck(25)
Garbage truck(105)
Bulk cement truck(23)
Concrete mixer truck(31)
Tow truck(50)
Van truck(137)
Contact us
Tel: 0086-0722-3229933
Fox: 0086-0722-3229933
Email: cj001@urspv.com
Add: Starlight industrial park, Northern suburbs, Suizhou city, hubei province, C...
Contact Now
Home > News > Industry News > Compress the garbage truck wor.....

News

Compress the garbage truck work sequence

  • Author:changjie
  • Release on :2017-04-05
Compression garbage trucks load trash

1. rotating barrel (Board) operate the knobs to the left down, double barrel (Board) institutions down, loosen the knob back in, then turn the scraper operation knob to right away, squeegee up, release the knob in the back, ready to start hanging barrel. As shown in Figure:

Loading the bucket
2. hang up the trash, rotating barrel action turn on the knob to the right location, trash can flip upwards, automatic unloading garbage into the arc-shaped body, loosen the knob in the back; figure:
Loading the bucket
3. rotating barrel action under the knobs to the left position, trash back home, release the knob in the back; and swivel slide knob to left drop location, skateboard slide (Note: scraper take up position), loosen the knob back in, resumption and blowing garbage; figure:
Trash can
4. rotating scraper operation knob to position inside left, scraping along the arc blow up trash, loosen the knob in the back; figure:

Compressed garbage
5. rotating skateboard action sliding knob to right position (Note: under the squeegee cylinders must exceed the limit switch marked position), slide on a skateboard drive scraper but, loosen the knob back in, garbage was brought up by scraper, ready to push refuse as shown in Figure:
Promote rubbish
6. turn the negative pressure operation knob to the right to launch location, garbage is negative plate pushed into the trunk of your car, release the knob in the back if:
Garbage pushed into the trunk
7. turn the operation under negative pressure knob to the left back position, negative plate back, loosen the knob back in, completed 1 load of rubbish; figure:
Complete a load
Again mount garbage, please continue to step 1 (Rotary scraper operation knob to close, ready to hang drum) begins operation;
If you do not need to be loaded again, rotating barrel action turn on the knob to the right location, double barrel bodies turn up, then release the power take off, vehicles can be moved.

Compression garbage trucks unload garbage

Step 8. Waste before unloading, vehicle operation when the 6 standard atmospheric pressure is reached, hang, PTO, front-stage two-valves, rotate the lifting action lift knob to right positions, body lift, release the knob back in, ready to unload garbage; figure:
Unloading trash
9. revolving plate launched operation knob to the right position, the trunk of your car pusher trash launched car, loosen knob complete discharging waste to work if:
Complete the uninstall
Step 10. revolving plate operation the knobs to the left back position, push plate was recovered, release the knob; then turn the operation knob to left drop location, and trunk lock down, loosen the knob and release the PTO (double barrel body extended position, please turn it on), the vehicle can be moved. Vehicle moving agencies such as:
Complete the uninstall, move the vehicle
Hubei Czech special automobile limited company is a professional automotive manufacturer, mainly produces sanitation garbage truck, hook arm garbage truck, fire sprinkler, compressing garbage truck, hanging bucket truck, sprinkler tank trucks, refuse collection vehicles at reasonable prices, top quality, the annual production capacity of more than, the strength of the company, service-oriented, looking forward to your visit.